B-07, Programming Test Step T01 CODE Index Programming Opel Omega B

B-07, Programming Test Work Order Description Nominal Value T01 Tester Display Code Index Programming Para>this Function Is Used to Program Different Codes Depending on the Vehicle Configuration: Vehicle Speed Dependent Radio Volume Increase Number of Displayable Characters in the Info Display (8 or 10 Digit Display) Illumination Dimmer Curve (Illumination Dimming Varies from Vehicle to Vehicle) Number of Signals (Depending on Whether a Front Wheel or Rear Wheel Drive Is Installed, a Different Number of Signals Is Evaluated per Each Kilometer) Ignition on Press Corresponding Key in the System Main Menu to Call Up Programming Functions, Select the Desired Test and Confirm with Enter. Follow the Instructions in the Diagnostic Tester Display. Para>the Following Display Indicates, That the Code Version of the Corresponding Control Unit Is Higher (Later Version) Than the Versions Programmed in the Diagnostic Tester: Code Version in Tech 2 Too Old ! Continue ? Para>if the Following Display Appears During the Test, Programming Has Been Completed Successfully: Successfully Programmed ! Para> Note: Compare the Data of the Electronic System Control Unit Shown on the Diagnostic Tester with the Information Presented in Chapter "Control Unit, Parts and Catalogue Number". (Refer Also to the Newest Technical Documentation) Para> Concerned Terminals: - Yes: T02 No: C-02