Function with Memory
The new memory system is a combination of the electrically adjustable driver's seat and electrically adjustable inside and outside rear view mirrors.
Once a user has found the correct personal seat and mirror adjustments, these adjustments can be stored via the position tip switches.
The outside mirrors are adjusted via the control switches which are located in the driver's door handle.
The inside mirror is adjusted by hand.
The inside mirror also contains two serve motors and two potentiometers which automatically move the mirror to the preprogrammed position when the memory function is activated.
The driver's seat is adjusted using electric motors.
Three motors are located in the seat console and a fourth is in the seat backrest.
Each motor has a potentiometer which constantly reports the current seat position to the control unit.
The control unit stores all data, such as end stops, position data, and data from the anti - submarining device.
If one of the position switches is pressed, the control unit compares the nominal / actual values and actuates the relevant serve motors until the preprogrammed seat and mirror positions are attained.
This system can be checked with TECH 1.