Replace Front Mud Flap Opel Meriva A

Remove

1. 1. Raise vehicle
2. 2. Remove front mud flap • Remove 4x body-bound rivet (1) • Carefully separate adhesive seam from outside of wing using a plastic spatula • Remove mud flap (2)

Note. Avoid damaging the paintwork!

3. 3. Remove spacer (2) • Remove bracket (1) in direction of arrow

Install

4. 4. Install spacer • Install bracket
5. 5. Clean adhesive contact surface on wing • Remove adhesive residue
6. 6. Remove protective film from adhesive strips on new mud flap
7. 7. Fit front mud flap • Align mud flap and place in position • Press on mud flap in area of adhesive • Install 3x body-bound rivet
8. 8. Lower vehicle