Operating Cables, Both, Basic, Adjust
The basic adjustment of both operating cables is necessary if there is a malfunction of the glass panel (except when flat gear motor fails) and when replacement of cables is necessary.
| .D. ICON01.tif | 0,75 | 0,75 | tiff;; Remove, Disconnect |
Glass panel, water deflector panel, crank drive / flat gear motor, slide block guide.
| Push operating cable guide on guide rail to front stop. | |||
|---|---|---|---|
| .P. C4332.tif | 9 | 7,5 | tiff;; |
| .D. ICON01.tif | 0,75 | 0,75 | tiff;; Remove, Disconnect |
Operating cable guide.
Push towards rear with connecting pin (1) flush on rail adjusting notches (2).
| .D. ICON08.tif | 0,75 | 0,75 | tiff;; Adjust |
Hold - down clamp of slide block guide.
| Hold - down clamp slider (3) goes past rear edge of rail recess with slight offset (0.2 - 0.5 mm / 0.008 - 0.020 in. ). | |||
|---|---|---|---|
| .P. D1124.tif | 9 | 7,5 | tiff;; |