Table 7, F7:PROGRAMMING
PROGRAMMING COUNTRY CODE
| No. | Tech 1 Display | Conditions for checking | Nominal Value | Trouble Codes | Terminal |
|---|---|---|---|---|---|
| 01 | PROGRAMMING COUNTRY CODES | Ignition "ON" |
Press F7, start programming
Choose the country code that you want to programme. Select one of the following countries:
· Germany (or Europe, except for the countries mentioned below)
· Great Britain
GB
· Switzerland
CH
· Netherlands
NL
Confirm with ENTER
If the display on the right appears after programming, the programming has been completed.
GERMANY
GR. BRITAIN
SWITZERLAND
NETHERLANDS
| PROGRAMMING COUNTRY CODE OKAY | - | - |
|---|---|---|
| If the display on the right appears, a fault has occurred during programming.Perform the following test steps in the order listed below: |
· Read trouble code; no trouble code must be stored
· Repeat programming;
· Perform TECH 1 self - test;
· Check TECH 1 cable for damaged insulation and shielding;
| · Repeat programming with a new control unit. | PROGRAMMING COUNTRY CODE FAILED | - | - |