F7:programming Country Code Opel Frontera A

Anti- theft Warning System ATWS F7:PROGRAMMING COUNTRY CODE

COUNTRY CODE

Affected Terminals: -

Possible Trouble Codes: -

Ignition ON

Press F7 in the system main menu, select desired test with arrow keys and confirm with YES. Follow the instructions in the diagnostic tester display.

Start programming

After programming is started, choose the country code that you want to programme. Select one of the following countries:

Germany (or Europe, except for the countries mentioned below) D

Great Britain GB

Switzerland CH

Netherlands NL

If the display on the right appears after programming, the programming has been completed.

GR BRITAIN

SWITZERLAND

NETHERLANDS

PROGRAMMING

COUNTRY CODE

OKAY

If the display on the right appears, as fault has occurred during programming. Perform the following test steps in the order listed below:

· Read trouble code; no trouble code must be stored

· repeat programming;

· Perform diagnostic tester selftest;

· Check diagnostic tester cable for damaged insulation and shielding;

COUNTRY CODE