Warning: Before installation work affecting the airbag, follow the safety instructions for the pyrotechnic systems.
Remove
- 1. Remove airbag
Note. The airbag unit must not be forced open and must always be laid with the cushion side facing upwards.
- 2. Lock steering in straight ahead position • Remove ignition key – Allow steering wheel lock to engage
- 3. Remove steering wheel • Where fitted, separate Infotainment wiring harness plug (1) • Unscrew bolt (2)
- 4. Clean threads
Install
- 5. Install steering wheel (2) • Route airbag wiring harness (1) through installation opening • Push steering wheel (2) onto steering column • Insert bolts with locking compound • Tighten bolt 30 Nm
Note. Ensure that the markings (3) on the steering wheel align precisely with those on the steering column
- 6. Install airbag