Home ReviewsRefund
Home/Opel/Corsa/Opel Corsa D (2007-2011)/Repair manual/ABS 8/Replace Wheel Speed Sensor
Contents Wiring diagrams Section: ABS 8 All sections

Replace Wheel Speed Sensor Opel Corsa D

ABS 8 3 illustrations ~137 words

Remove

  1. 1. Detach rear wheel • Unscrew 4x wheel bolt
  2. 2. Detach wheel housing inner panelling • Detach 3x nuts (1) • Carefully fold wheel housing inner panelling aside
  1. 3. Detach wiring harness • Disconnect wiring harness plug (1) • Release wiring harness plug (1) on inside (4) of clip (2) (3) • Unclip 3x wiring harnesses
  1. 4. Remove wheel sensor (1) • Unscrew bolt (2)

Note. Remove wheel sensor straight.

Install

  1. 5. Install wheel sensor • Tighten bolt 8 Nm
  2. 6. Attach wiring harness • Insert wiring harness plug into lock from above – Lock wiring harness plug to clip • Fix wiring harness plug • Clip in 3x wiring harness
  3. 7. Attach wheel housing inner panelling • Tighten 3x nuts
  4. 8. Attach rear wheel • Tighten 4x wheel bolts 110 Nm

More articles — Brakes