Checking Program
| Trouble Code | Trouble Code Storage when... | Remarks |
|---|---|---|
| 95 | Trouble code is stored if interruptions are recognized during radio/TID data transfer (time limit exceeded). | If trouble codes 81 to 92 are stored at the same time, start diagnosis there. |
| Notes on Trouble-shooting: | Nominal Value: | Cause of Fault: |
| (If nominal value is not attained) | ||
| · This function cannot be checked in the wiring harness. | ||
| · Check wiring harness plug (loose contact): | OK | · Wiring harness defective (check contact springs of wiring harness connection) |
· Radio defective
To be on the safe side, carry out a RESET, i.e., switch radio off and on again.
After approx. 5 s, the TID must return to normal display mode.