Program Memory "EEPROM", Program
The data stored in the "EEPROM" program memory can be altered using TECH 1 if the contents of the program memory do not match the nominal values.
Precondition for programming of the "EEPROM" program memory:
· ATWS control unit functions correctly
(trouble code 55 not present)
Activate TECH 1 programming mode by actuating the "F7" key F7:PROGRAMMING .
CODE no. programming:
· TECH 1 display :
Set SELECT
COUNTRY CODE to the desired code no. by actuating the arrow keys.
· CODE nos. can be found in Table 3.
· Then start the programming procedure by pressing the "ENTER" key.