Cable Connectors and Shrink-Down Plastic Tubes
| Designation / cross-section | Part No. | Catalogue No. |
| Cable connectors | | |
| 0.35 mm 2 | 09 119 561 | 12 86 669 |
| 0.5 / 0.75 / 1.0 mm 2 | 90 543 865 | 12 86 663 |
| 1.5 / 2.5 mm 2 | 90 543 866 | 12 86 664 |
| 4.0 / 6.0 mm 2 | 90 543 867 | 12 86 665 |
| Shrink-down plastic tubes | | |
| 0.35 / 0.5 / 0.75 / 1.0 mm 2 | 90 543 875 | 12 86 666 |
| 1.5 / 2.5 mm 2 | 90 543 876 | 12 86 667 |
| 4.0 / 6.0 mm 2 | 90 543 877 | 12 86 668 |
| CAN-bus pigtail | | |
| all | 93 177 449 | 12 92 338 |
Retaining Strap, Adhesive Tape and Corrugated Tube
| Designation | Part No. | Catalogue No. |
| Retaining strap | | |
| 97 mm long | 90 247 260 | 12 88 880 |
| 120 mm long | 90 381 846 | 12 88 885 |
| 122 mm long | 90 196 418 | 12 88 879 |
| 146 mm long | 90 493 329 | 12 88 586 |
| 191 mm long | 90 307 872 | 12 88 882 |
| 255 mm long | 90 039 907 | 12 88 900 |
| Adhesive tape | | |
| 9 mm x 0.2 mm, 10 m roll | 90 543 264 | 12 86 675 |
| Corrugated tube , in each case 5 m rolls | | |
| 10 mm outside diameter | 90 443 557 | 12 88 103 |
| 18 mm outside diameter | 90 443 558 | 12 88 104 |
| 29 mm outside diameter | 90 443 559 | 12 88 102 |
Wiring Harness Plug with Lead Ends
The assignment of repairable wiring harness plugs to crimping and release tools as well as parts and catalogue numbers can be found in the following tables.
Using the Tables
- Column 1 provides the code for the available wiring harness plug with lead ends. This code can be ascertained from the current circuit diagram.
- Column 2 provides the handle colour for the crimping tools to be used.
- Columns 3 and 4 indicate the release tools for the primary and secondary lock.
- Empty fields for release tools mean that the plugs or couplings can be released either by hand or using a commercially available screwdriver.
- Columns 5 and 6 contain the part and catalogue numbers for the wiring harness plugs with lead ends.