Home ReviewsRefund
Home/Opel/Combo/Opel Combo C (2002-2011)/Repair manual/Switches, Control Unit, Relays, Ignition Lock/Control Unit - Telephone System - Replace (Upgrade Kit)
Contents Wiring diagrams Section: Switches, Control Unit, Relays, Ignition Lock All sections

Control Unit - Telephone System - Replace (Upgrade Kit) Opel Combo C

Switches, Control Unit, Relays, Ignition Lock 2 illustrations

Remove

  1. 1. Disconnect battery.
  2. 2. Remove glove compartment • Unscrew 4x bolt (arrows)
  1. 3. Remove control unit • Detach control unit and lay aside – Cut 2x cable tie (1) • Disconnect 4 wiring harness plugs (2)

Install

  1. 4. Fit control unit • Fasten control unit – Connect 4x wiring harness plug – Connect 2x cable tie
  2. 5. Position glove compartment in instrument panel padding and attach it • Tighten 4x screw
  3. 6. Connect battery.
  4. 7. Program volatile memories

More articles — Electrical Equipment and Instruments