Field Remedy: 2275
| Subject: | Electric windows - Malfunction |
| Models: | Engines: | Option: |
|---|---|---|
| All | All | Only electric windows with protective system |
| Complaint: | I. Automatic opening and closing function of the windows not possible (power supply was cut off). II. Windows open above the middle position. |
|---|---|
| Cause: | I. Window electronic not activated. II. Window encounters resistance (e.g. ice). |
| Production: |
Remedy:
Note: Before changing any parts follow the instruction below.
In case of customer complaint I:
- Close doors, ignition on. - Close window completely and hold 'close'- button for 5 seconds. - Open window completely do not interrupt. - Repeat for each window.
In case of customer complaint II:
- Try to close window 3 times, next closing attempt the window should close. - If not, close the window in stages by intermittent pressing the button and hold 'close'- button for further 5 seconds.
- If efforts were unsuccessful interrupt power supply (pull window lifter fuse for a second) and repeat the procedure.
| FunctionalGroup: | C - Equipment/Windows |
|---|---|
| Complaint Group: | 04 - Electrical failures,13 - No/Poor Function |
| Trouble Code: | None |