Telephone Bracket - Replace (Upgrade Kit) Opel Combo C

Remove

1. 1. Remove telephone cradle
2. 2. Remove glove compartment • Unscrew 4x bolt (arrows)

3. 3. Remove base holder • Unscrew bolt (1) • Lay base holder aside

4. 4. Detach positioning disc • Remove 2x screw (1)

5. 5. Remove bracket • Unscrew bolt (1) • Detach bonding surface (2) • Take out bracket

Install

6. 6. Install bracket • Insert bracket • Bond surfaces together – Pull off protective film and affix bracket • Drill a 2.0 mm diameter hole – I 35 mm – II 30 mm

7. 7. Install positioning disc • Screw in bolt (1) • Drill 2x ø 2 mm diameter hole (2) • Tighten 2x screw • Unscrew bolt (1)

Note. The positioning disc acts as a drilling template

8. 8. Install base holder • Tighten bolt
9. 9. Insert telephone cradle
10. 10. Position glove compartment in instrument panel padding and attach it • Tighten 4x screw