Replace Decorative Films Opel Combo C

Remove

1. 1. Remove attaching parts such as rubber window seals and shaft strips
2. 2. Hear film slightly using a hot air blower and pull off

Install

3. 3. Clean adhesion surface with silicone remover

Note. Also pay attention to rear edges!

4. 4. Put decorative film in position (do not remove carrier film yet) • Place decorative film (2) in position and secure with adhesive tape (1) and (3) • Mark installation position • Remove decorative film

Note. Please ensure that decorative film is aligned with adjacent decorative films and window cut-outs during positioning!

5. 5. Moisten the adhesion area • Spray water with washing-up liquid onto component adhesion area using spray bottle

6. 6. Carefully remove decorative film from carrier film, position and stick on
7. 7. Drag air bubbles toward the outside using a plastic spatula

8. 8. Fold over outer edges or push into recesses and glue on

9. 9. Fit attaching parts