Traction Control TC F2: TROUBLE CODE TABLE
| Trouble Code | Information Sensor |
|---|---|
| Cause of Fault | Remedy in |
F0: DATA LIST
| No. | Trouble Code Storage when... | |
|---|---|---|
| 55 | REPLACE | |
| ECU | · Fault when reading or writing EEPROM |
· With ignition ON, the fault is recognized immediately
· The fault is stored directly on recognition
Effects:
· The TC function is switched off.
· The TC telltale is activated.
or
· Missing or faulty communication between the two microprocessors in control unit
· The fault is recognized in operation
· Above conditions must be fulfilled for at least 2 s
Effects:
· The safety relay is switched off.
· The TC telltale is activated.
or
· Safety relay switch - off does not function
· The fault is recognized on ignition OFF or when the relay switch - off is actived because of a fault
· The fault is directly stored on recognition
Effects:
· The TC telltale is activated.