Table 2 - Trouble Code Table
| Trouble Code | Information Sensor Cause of Fault | Remedy in FO:DATA LIST No. | Trouble Code Storage when .... | Remarks |
|---|---|---|---|---|
| 48 | BATTERY | |||
| VOLTAGE LOW | 03 | · Monitoring is activated after completion of the switch-on test The battery voltage is measured continuously and cyclically evaluated. |
· The fault is recognized if the battery voltage is in the range 5 V to 8.6 V with active ABS control (brake operation and ABS control are required) for 200 ms
or
· if the battery voltage is in the range 5 V to 9.4 V with inactive ABS control (brake operation and ABS control are not required) for 200 ms.
· The fault is stored after 60 s if it occurs before clearance for the drive-off test and after 200 ms if it occurs after clearance for the drive-off test.
| On fault recognition, the ABS is switched off and the ABS telltale is switched on. If the fault (battery voltage too low) is no longer present, the ABS is activated again. |