Table 2 - Trouble Code Table
| Trouble Code | Information Sensor Cause of Fault | Remedy in FO:DATA LIST No. | Trouble Code Storage when .... | Remarks |
|---|---|---|---|---|
| 44 | RL WHEEL SENOR | |||
| BAD SIGNAL | 02 | · Monitoring is activated as soon as the vehicle reference speed is > 12 km/h (7 mph) or a filtered wheel speed > 10 km/h (6 mph) is present |
· The fault is recognized if the vehicle reference speed is > 12 km/h (7 mph) after the vehicle drives off for the first time, while the speed of the front right wheel remains approx. 0 km/h (0 mph)
or
· if the vehicle reference speed is > 20 km/h (12.5 mph) after the vehicle drives off each subsequent time, while the speed of the rear left wheel remains approx. 0 km/h (0 mph)
or
· if, while travelling, at least one filtered wheel speed is > 10 km/h (6 mph), while the speed of the rear left wheel remains approx. 0 km/h (0 mph) for more than 20 s
or
· if the wheel speed is > 40 km/h (25 mph) and no signal flanks are registered within 2 cycles.
| On fault recognition, the ABS is switched off and the ABS telltale is switched on. |