Remove
- 1. Disconnect battery • Detach plus and earth poles
- 2. Wait 1 minute for airbag to deactivate
- 3. Remove battery • Unscrew bolt
- 4. Remove airbag sensor • Unscrew 2x bolt (1) • Separate wiring harness plug and remove sensor
Install
- 5. Install airbag sensor • Insert sensor and connect wiring harness plug • Tighten 2x bolt 6 Nm
- 6. Install battery • Attach plus and earth poles
- 7. Connect battery • Tighten the bolt
- 8. Perform readiness check
- 9. Program volatile memories