Windshield Wiper Switch Replacement Opel Agila B

Remove

1. 1. Disconnect battery negative lead
2. 2. Remove lower trim panel (1) from instrument panel • Release 10x clip
3. 3. Remove 2x canopy (2) from steering column • Remove 3x screw (3) • Release lower canopy from upper canopy – Release 7x clip

Note. Turn steering wheel to gain access to screws as required.

4. 4. Remove immobilizer control module (2) from steering and ignition lock assembly • Disconnect harness connector (1) • Remove screw (3)

5. 5. Remove windshield wiper switch (1) from steering column (3) • Disconnect harness connector (2) • Release clip

Install

6. 6. Install new windshield wiper switch (1) to steering column (3) • Secure clip • Connect harness connector (2)

7. 7. Install immobilizer control module (2) to steering and ignition lock assembly • Install screw (3) • Connect harness connector (1)

8. 8. Install 2x canopy (2) to steering column • Secure lower canopy to upper canopy – Secure 7x clip • Install 3x screw (3)

Note. Turn steering wheel to gain access as required.

9. 9. Install lower trim panel (1) to instrument panel • Secure 10x clip

10. 10. Connect battery negative lead
11. 11. Program all volatile memories – see operation “Program Volatile Memories”