Front Door Interior Handle Replacement Opel Agila B

1. 1. Remove upper trim panel (1) from door • Release clip, locator
2. 2. Remove inner trim panel from door • Remove 2x screw (2), 2x clip (3) • Remove window winder handle (if installed) – Release clip, then pull off • Release 9x clip, locator • Disconnect harness connector from power window switch (if installed)

3. 3. Release interior handle (1) from door • Slide rearwards, then pull out
4. 4. Remove interior handle from vehicle • Release 2x cable (2) from 2x clip – Slide out • Disconnect 2x cable

Install

5. 5. Install new interior handle (1) to vehicle • Connect 2x cable (2) • Secure 2x cable to 2x clip – Slide in
6. 6. Secure interior handle to door • Push in, then slide forwards

7. 7. Install inner trim panel to door • Connect harness connector to power window switch (if installed) • Secure 9x clip, locator • Install window winder handle (if installed) – Push on, then secure clip • Install 2x screw (2), 2x clip (3)
8. 8. Install upper trim panel (1) to door • Secure locator, clip