Side Airbag Sensor Replacement Opel Agila B

Remove

1. 1. Disconnect battery negative lead • Release nut
2. 2. Slide and tilt driver or passenger seat forward
3. 3. Remove lower inner trim panel (1) from B pillar • Prise off to release upper half – Use suitable tool • Pull off 4x clip to release lower half

4. 4. Disconnect harness connector from side airbag sensor (2) • Pull back floor carpet as necessary
5. 5. Remove side airbag sensor from vehicle body • Pull back floor carpet as necessary • Remove bolt (1), then release locator from vehicle body

Install

6. 6. Install new side airbag sensor (2) to vehicle body • Pull back floor carpet as necessary • Push in locator, then install bolt (1) 8 Nm
7. 7. Connect harness connector to side airbag sensor • Pull back floor carpet as necessary

8. 8. Install lower inner trim panel (1) to B pillar • Secure upper half – Use suitable tool • Push on 4x clip to secure lower half

9. 9. Install floor carpet as necessary
10. 10. Slide and tilt driver or passenger seat back
11. 11. Connect battery negative lead • Secure nut 11 Nm
12. 12. Program all volatile memories – see operation “Program Volatile Memories”