Keyless Entry Receiver Replacement Opel Agila B

Remove

1. 1. Remove glove compartment (1) from instrument panel • Open glove compartment • Press 2x side panel inwards, then release from 2x locator (2)

2. 2. Remove keyless entry receiver (1) from support bracket • Disconnect harness connector • Release clip, then slide off support bracket – Use suitable tool

Install

3. 3. Install new keyless entry receiver (1) to support bracket • Slide onto support bracket to secure clip • Connect harness connector

4. 4. Install glove compartment (1) to instrument panel • Push into 2x locator (2) • Press 2x side panel inwards, then secure to instrument panel • Close glove compartment