Remove
- 1. Open bonnet
- 2. Disconnect battery • Detach earth connection
- 3. Detach temperature sensor from coolant hose • Place collecting tray underneath • Disconnect wiring harness plug • Close 2x coolant hose (1) with hose clamp (2) • Detach 2x clamps (3) • Detach 2x coolant hose from temperature sensor (4).
Install
- 4. Attach temperature sensor to coolant hose • Attach 2x coolant hose to temperature sensor. • Attach 2x clamps • Detach 2x hose clamps • Connect wiring harness plug • Remove collecting pan
Note. Replace clamps.
- 5. Connect battery • Attach earth connection
- 6. Program volatile memories
- 7. Check coolant level and top up if required.
- 8. Close bonnet