Note. For circuit reference, see the appropriate WIRING DIAGRAMS article. For connector and terminal identification, see CONNECTOR IDENTIFICATION .
Circuit Description
Output Driver Modules (ODM) are used by PCM to turn on current-driven devices needed to control various engine and transaxle functions. Each ODM can control up to 7 outputs, including low engine oil level indicator driver circuit, by supplying ground to device PCM is commanding on. ODMs can diagnose each circuit individually. If ODM "D" output 3 (hot light indicator driver circuit) detects an improper voltage level, P1673 is set.
Conditions required to set DTC are
- Ignition is on.
- An improper voltage level has been detected on engine hot light indicator driver circuit.
- Conditions present for at least 20 seconds.