SPECIFICATIONS
| Application | Specification |
|---|
| Compressor Type | (1) |
| Compressor Belt Tension | (2) |
| System Oil Capacity (3) | 9.7 oz |
| Refrigerant (R-134a) Capacity | 35 ozs. |
| System Operating Pressures (4) |
| High Side | 127-197 psi (8.9-13.8 kg/cm 2 ) |
| Low Side | 25-34 psi (1.8-2.4 kg/cm 2 ) |
| (1) Refer to underhood A/C specification label in engine compartment. (2) Engine is equipped with automatic serpentine belt tensioner. No adjustment is required. (3) Use PAG Oil (Part No. 12345923). (4) Approximate operating pressures with ambient temperature at 70°F (21°C) and engine at idle. |
| (1) | Refer to underhood A/C specification label in engine compartment. |
| (2) | Engine is equipped with automatic serpentine belt tensioner. No adjustment is required. |
| (3) | Use PAG Oil (Part No. 12345923). |
| (4) | Approximate operating pressures with ambient temperature at 70°F (21°C) and engine at idle. |
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|
| A/C Refrigerant Line |
| Accumulator | 15 (20) |
| Compressor | 15 (20) |
| Condenser | 15 (20) |
| Orifice Solenoid | 20 (27) |
| Compressor Mounting |
| Front Nut | 37 (50) |
| Rear Bolt | 37 (50) |
| Rear Nut | 18 (25) |
| Right Front Frame Cradle (V-6) | 141 (191) |
| Instrument Panel Carrier Bolts | 18 (25) |
Automatic A/C-Heater System Wiring Diagram (2001 Aurora - 1 Of 2). Scheme 1
Automatic A/C-Heater System Wiring Diagram (2001 Aurora - 2 Of 2). Scheme 2
