Home ReviewsRefund
Home/Nissan/Versa/Nissan Versa II (2012-2014)/Repair manual/Windows/Power Window Control System: Removal & Installation
Contents Wiring diagrams Section: Windows All sections

Power Window Control System: Removal & Installation Nissan Versa II

Windows 4 illustrations ~166 words

INSTALLATION

Installation is in the reverse order of removal.

Scheme 4

Scheme 4: REMOVAL
Scheme 4: REMOVAL

Scheme 5

Scheme 5
Scheme 5
  1. Remove front power window and door lock/unlock switch (RH) finisher assembly using a suitable tool (A).
  2. Disconnect the harness connector from the front power window and door lock/unlock switch (RH).
  3. Separate front power window and door lock/unlock switch (1) from front power window and door lock/unlock switch (RH) finisher using a suitable tool. CAUTION: Do not bend back the pawls on the switch finisher too far or breakage may occur.

Installation is in the reverse order of removal.

Scheme 6

Scheme 6: REMOVAL
Scheme 6: REMOVAL

Scheme 7

Scheme 7
Scheme 7
  1. Remove rear power window switch finisher (1) assembly using a suitable tool (A).
  2. Disconnect the harness connector from the rear power window switch.
  3. Separate rear power window switch (1) from rear power window switch finisher using a suitable tool. CAUTION: Do not bend back the pawls on the switch finisher too far or breakage may occur.

Installation is in the reverse order of removal.

More articles — Power Window Control System