Parts Requiring Angle Tightening
- For the final tightening of the following engine parts use Tool: Tool number: KV10112100 (BT-8653-A) Camshaft sprocket (INT) bolt Cylinder head bolts Main bearing cap bolts Connecting rod cap bolts Crankshaft pulley bolt (Note an angle wrench is required as bolt flange is provided with notches for angle tightening)
- Do not use a torque value for final tightening.
- The torque value for these parts are for a preliminary step.
- Ensure thread and seat surfaces are clean and coated with engine oil.
GENERAL SPECIFICATIONS
| Engine type | HR16DE | |
|---|---|---|
| Cylinder arrangement | In-line 4 | |
| Displacement | Cm 3 (cu in) | 1, 598 (97.51) |
| Bore and stroke | Mm (in) | 78.0x 83.6 (3.071 x3.291) |
| Valve arrangement | DOHC | |
| Firing order | 1-3-4-2 | |
| Number of piston rings | Compression | 2 |
| Oil | 1 | |
| Compression ratio | 9.8 | |
| Compression pressure kPa (kg/cm 2 , psi)/200 RPM | Standard | 1, 510 (15.4, 219) |
| Minimum | 1, 270 (12.95, 184) | |
| Differential limit between cylinders | 100 (1.0, 14.5) | |
See also:
• DIAGNOSIS PROCEDURE