Home ReviewsRefund
Home/Nissan/Versa/Nissan Versa I (2006-2012)/Repair manual/Engine Mechanical/FLYWHEEL DEFLECTION (M/T MODELS)
Contents Wiring diagrams Section: Engine Mechanical All sections

FLYWHEEL DEFLECTION (M/T MODELS) Nissan Versa I

Engine Mechanical 1 illustration

FLYWHEEL DEFLECTION (M/T MODELS)

  1. Measure the deflection of flywheel contact surface to clutch with a dial indicator (A).
  2. Measure the deflection at 210 mm (8.27 in) diameter. Limit: 0.45 mm (0.0177 in) or less.
  3. If measured value is out of the standard, replace flywheel.
  4. If a trace of burn or discoloration is found on the surface, repair it with sandpaper.
CAUTIONWhen measuring, keep magnetic fields (such as dial indicator stand) away from signal plate of the rear end of crankshaft.

Scheme 209

Scheme 209
Scheme 209