Starting & Charging System: Removal & Installation Nissan Versa I

REMOVAL

1. Loosen battery terminal nuts (A), and disconnect both battery cables from battery terminal. CAUTION: When disconnecting, disconnect the battery cable from the negative terminal first.
2. Remove battery frame nuts (B) and battery frame.
3. Remove battery shield.
4. Remove battery.

INSTALLATION

Installation is in the reverse order of removal.

Battery frame nut : 3.9 N.m (0.40 kg-m, 35 in-lb)

Battery terminal nut : 5.4 N.m (0.55 kg-m, 48 in-lb)

1. Disconnect the battery negative terminal.
2. Remove air duct (inlet). Refer to «AIR CLEANER AND AIR DUCT»(ref-337614-S10865575882009080600000) .
3. Remove reservoir tank. Refer to «RADIATOR»(ref-337624-S35187671372009080600000) .
4. Remove "S" terminal nut.
5. Remove "B" terminal nut.
6. Remove starter motor bolts.
7. Remove starter motor.

Installation is in the reverse order of removal.

1. Disconnect the battery cable from the negative terminal.
2. Remove drive belt. Refer to «COMPONENTS»(ref-337614-S08255717852009080600000) .
3. Disconnect generator connector.
4. Remove "B" terminal nut.
5. Remove generator bolts.
6. Remove generator assembly from the vehicle.

Installation is in the reverse order of removal.