Home ReviewsRefund
Home/Nissan/Rogue/Nissan Rogue I рестайлинг (2010-2013)/Repair manual/Windows/Power Window Control System: Removal & Installation
Contents Section: Windows All sections

Power Window Control System: Removal & Installation Nissan Rogue I рестайлинг

Windows 1 illustration ~119 words

REMOVAL

  1. Remove the power window main switch finisher (2). Refer to " «FRONT DOOR FINISHER : EXPLODED VIEW»(ref-405892-S30538652462011062300000) " and " «FRONT DOOR FINISHER : REMOVAL AND INSTALLATION»(ref-405892-S22983383112011062300000) ".
  2. Power window main switch (1) is removed from power window main switch finisher (2) using flat-head screw driver (A) etc.
CAUTIONDo not fold the pawl of power window main switch finisher.

Note. The same procedure is also performed for front power window switch (passenger side) and rear power window switch (LH&RH).

Scheme 4

Scheme 4
Scheme 4

INSTALLATION

Install in the reverse order of removal.

Note. Power window main switch is exchanged or is detached it is necessary to do the initialization procedure. Refer to " ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL : SPECIAL REPAIR REQUIREMENT ".

More articles — Power Window Control System