Contents Section: Windows All sections

Power Window Control System: Application Nissan Rogue I рестайлинг

APPLICATION ITEM

CONSULT-III can display each diagnostic item using the diagnostic test modes shown following.

Diagnosis modeFunction description
ECU IdentificationBCM part number is displayed.
Self-Diagnostic ResultDisplays the diagnosis results judged by BCM. Refer to " DTC INDEX ".
Data MonitorBCM input/output signals are displayed.
Active TestThe signals used to activate each device are forcibly supplied from BCM.
Work SupportChanges the setting for each system function.
ConfigurationRead and save the vehicle specification. Write the vehicle specification when replacing BCM.
CAN Diag Support MonitorMonitors the reception status of CAN communication viewed from BCM.

FUNCTION DESCRIPTION CHART

SYSTEM APPLICATION

BCM can perform the following functions for each system.

Note. It can perform the diagnosis modes except the following for all sub system selection items.

X: Applicable item
SystemCONSULT-III sub system selection itemDiagnosis mode
Work SupportData MonitorActive Test
Door lockDOOR LOCKXXX
Rear window defoggerREAR DEFOGGERXX
Warning chimeBUZZERXX
Interior room lamp controlINT LAMPXXX
Remote keyless entry systemMULTI REMOTE ENTXXX
Exterior lampHEAD LAMPXXX
Wiper and washerWIPERXXX
Turn signal and hazard warning lampsFLASHERXX
Auto air conditioning system Manual air conditioning systemAIR CONDITONERX
Intelligent Key systemINTELLIGENT KEYX
Combination switchCOMB SWX
Body control systemBCMX
ImmobilizerIMMUXX
Interior room lamp battery saverBATTERY SAVERXXX
Back door openTRUNKXX
Vehicle security systemTHEFT ALMXXX
RAP system RETAINEDPWRXXX
Signal buffer systemSIGNAL BUFFERXX
FUEL LID (1)
TPMSTPMS (AIR PRESSURE MONITOR)XXX
Panic alarm systemPANIC ALARMX
(1) This item is displayed, but is not function.
(1)This item is displayed, but is not function.

BCM FUNCTION REFERENCE CHART