MAINTENANCE INFORMATION
| CAUTION | During trouble diagnosis or when the following parts have been replaced with a used parts, and if mechanical key is added, registration* is required. A new part (except Intelligent Key and mechanical key) should register automatically after the ignition switch is turned ON. New one means a virgin control unit that has never been energized on-board *: All keys kept by the owner of the vehicle should be registered with mechanical key. ECM BCM Mechanical key Intelligent Key unit Steering lock unit NVIS/NATS trouble diagnosis, system initialization and additional registration of other mechanical key IDs must be carried out using CONSULT-III hardware and SECURITY CARD. When NVIS/NATS initialization has been completed, the ID of the inserted Intelligent Key or mechanical key IDs can be carried out. Possible symptom of NVIS/NATS malfunction is "Engine cannot start". The engine can be started with the Intelligent Key system and NVIS/NATS. Identify the possible causes according to "Work Flow", Refer to " WORK FLOW ". If ECM other than Genuine NISSAN is installed, the engine cannot be started. |
Identifying NVIS System Component Parts Location (1 Of 2). Scheme 172
Scheme 172: Identifying NVIS System Component Parts Location (1 Of 2)
Identifying NVIS System Component Parts Location (2 Of 2). Scheme 173
Scheme 173: Identifying NVIS System Component Parts Location (2 Of 2)
| CAUTION | During trouble diagnosis or when the following parts have been replaced with a used parts, and if ignition key is added, registration* is required. A new part (except ignition key) should register automatically after the ignition switch is turned ON. New one means a virgin control unit that has never been energized on-board *: All keys kept by the owner of the vehicle should be registered with ignition key. ECM BCM Ignition key NVIS/NATS trouble diagnosis, system initialization and additional registration of other ignition key IDs must be carried out using CONSULT-III hardware and SECURITY CARD. When NVIS/NATS initialization has been completed, the ID of the inserted ignition key IDs can be carried out. If ECM other than Genuine NISSAN is installed, the engine cannot be started. |
Identifying NVIS Component Parts Location (1 Of 2). Scheme 174
Scheme 174: Identifying NVIS Component Parts Location (1 Of 2)
Identifying NVIS Component Parts Location (2 Of 2). Scheme 175
Scheme 175: Identifying NVIS Component Parts Location (2 Of 2)
