Accelerator Control System: Diagnosis Nissan Quest IV

INSPECTION AFTER INSTALLATION

1. Check accelerator pedal moves smoothly within the whole operation range when it is fully depressed and released.
2. Check accelerator pedal securely returns to the fully released position.
3. For the electrical inspection of accelerator pedal position sensor, refer to " «COMPONENT INSPECTION»(/nissan/quest/iv-2010-2024/remont/testing-diagnostics/#engine-control-system-diagnostic-codes-symptom-tests) ", " «COMPONENT INSPECTION»(/nissan/quest/iv-2010-2024/remont/testing-diagnostics/#engine-control-system-diagnostic-codes-symptom-tests) " and " «COMPONENT INSPECTION»(/nissan/quest/iv-2010-2024/remont/testing-diagnostics/#engine-control-system-diagnostic-codes-symptom-tests) ". CAUTION: When harness connector of accelerator pedal position sensor is disconnected, perform " «ACCELERATOR PEDAL RELEASED POSITION LEARNING»(ref-672625-S08708938252014112400000) ". Refer to " «DESCRIPTION»(ref-672625-S32368788872014112400000) ".

See also:
• COMPONENT INSPECTION