CONSULT-II Function (BCM)
CONSULT-II can display each diagnostic item using the diagnostic test modes shown following.
| BCM diagnostic test item | Diagnostic mode | Description |
|---|---|---|
| Inspection by part | WORK SUPPORT | Supports inspections and adjustments. Commands are transmitted to the BCM for setting the status suitable for required operation, input/output signals are received from the BCM and received data is displayed. |
| DATA MONITOR | Displays BCM input/output data in real time. | |
| ACTIVE TEST | Operation of electrical loads can be checked by sending drive signal to them. | |
| SELF-DIAG RESULTS | Displays BCM self-diagnosis results. | |
| CAN DIAG SUPPORT MNTR | The result of transmit/receive diagnosis of CAN communication can be read. | |
| ECU PART NUMBER | BCM part number can be read. | |
| CONFIGURATION | Performs BCM configuration read/write functions. |
DATA MONITOR FUNCTION REFERENCE
| Monitor item name "operation or unit" | Contents | |
|---|---|---|
| IGN ON SW | "ON/OFF" | Displays "IGN Position (ON)/OFF, ACC Position (OFF)" status as judged from ignition switch signal. |
| COMP ON SIG | "ON/OFF" | Displays "COMP (ON)/COMP (OFF)" status as judged from air conditioner switch signal. |
| FAN ON SIG | "ON/OFF" | Displays "FAN (ON)/FAN (OFF)" status as judged from blower fan motor switch signal. |
DISPLAY ITEM LIST
Scheme 200
*1 Operational Check