Manual sections Wiring diagrams
Repair manual

Body, Lock & Security System Nissan Quest III

Step-by-step instructions on "Body, Lock & Security System" for Nissan Quest III (2003–2009). Pick an article — removal, installation, adjustment and diagnostics with illustrations.

Precautions for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"

Precautions for work

Special Service Tool

Commercial Service Tool

CUSTOMER INTERVIEW

REPAIR THE CAUSE

CONFIRM THE REPAIR

INSTRUMENT PANEL

CENTER CONSOLE

DOORS

TRUNK

SUNROOF/HEADLINING

OVERHEAD CONSOLE (FRONT AND REAR)

SEATS

UNDERHOOD

WITHOUT AUTOMATIC SLIDING DOOR SYSTEM AND AUTOMATIC BACK DOOR SYSTEM

WITH AUTOMATIC SLIDING DOOR SYSTEM AND AUTOMATIC BACK DOOR SYSTEM

Functions available by operating the door lock and unlock switches on driver's door and passenger's door

Key reminder door system

WITH RIGHT HAND AUTOMATIC SLIDING DOOR SYSTEM AND AUTOMATIC BACK DOOR SYSTEM

WITH RIGHT AND LEFT HAND AUTO SLIDE DOOR CLOSURE AND AUTOMATIC BACK DOOR SYSTEM

Terminals and Reference Value for BCM

Work Flow

CONSULT-II Function (BCM)

"DOOR LOCK"

DATA MONITOR

INPUTS

Remote Control Entry Functions

Auto Lock Function

Remote Control Auto Sliding Door Function (Vehicles With Automatic Sliding Door System)

Active Check Function

Hazard and Horn Reminder

How to change hazard and horn reminder mode

Terminals and Reference Value for IPDM E/R

"MULTI REMOTE ENT"

Work Support

Hazard and horn reminder mode

Auto locking function mode

Check Hazard Function

Check Map Lamp and Ignition Keyhole Illumination Function

KEYFOB ID SET UP WITH CONSULT-II

Initial condition

Disarmed phase

Pre-armed phase and armed phase

Canceling the set vehicle security system

POWER SUPPLY AND GROUND CIRCUIT

INITIAL CONDITION TO ACTIVATE THE SYSTEM

VEHICLE SECURITY SYSTEM DEACTIVATION

Preliminary Check

Power Assist Function

Intermittent Clutch Control Function

Precautions

Control When Handle Open/Closed When Operating Enable Conditions Not Yet Met

Control When Operating Enable Conditions No Longer Met

Warning Chime Active Conditions

Reverse Conditions

Initialization Mode

SLIDING DOOR INITIALIZATION PROCEDURE

WITH RIGHT HAND SLIDE DOOR AUTO CLOSURE SYSTEM

WITH RIGHT AND LEFT HAND SLIDE DOOR AUTO CLOSURE SYSTEM

Terminals and Reference Value for Sliding Door Control Unit RH

Terminals and Reference Value for Sliding Door Control Unit LH

Terminals and Reference Value for Sliding Door Latch Control Unit

INPUT SIGNAL CHECK MODE

OPERATING CHECK MODE

Gas Stay Check

Warning Functions

Control When Handle Pulled When Operating Enable Conditions Not Yet Met

Terminals and Reference Value for Back Door Control Unit

FRONT DOOR

SLIDE DOOR

BACK DOOR

System Composition

ECM Re-communicating Function

ANTI-CORROSIVE PRECOATED STEEL (GALVANNEALED STEEL)

PHOSPHATE COATING TREATMENT AND CATIONIC ELECTRODE POSITION PRIMER

ANTI-CORROSIVE WAX

UNDERCOATING

BODY CENTER MARKS

PANEL PARTS MATCHING MARKS

HANDLING PRECAUTIONS FOR PLASTICS

Precautions in Repairing High Strength Steel

HIGH STRENGTH STEEL (HSS) USED IN NISSAN VEHICLES

Foam Repair