NVH Troubleshooting Chart
Use the chart below to find the cause of the symptom. If necessary, repair or replace these parts.
Scheme 1
Scheme 2
INSPECTION AFTER REMOVAL
- Check each part of steering intermediate shaft, lower joint, and steering column for damage or other malfunctions. Replace if there are any abnormal conditions.
INSPECTION AFTER INSTALLATION
- Rotate steering wheel to make sure it is centered and there is no binding, noise or excessive steering effort.
- Make sure that the number of turns are the same from the straight-ahead position to the left and right locks.
- Check each part of steering intermediate shaft, lower joint, and steering column for damage or other malfunctions. Replace if there are any abnormal conditions.
- Check the steering wheel play, neutral position steering wheel, steering wheel turning force, and front wheel turning angle. Refer to " «INSPECTION»(ref-675600-S39033142912014120500000) ".
- Check the neutral position of the steering angle sensor. Refer to " «WORK PROCEDURE»(ref-675599-S14805241842014120500000) ".
Scheme 3
- Check each part of steering gear for damage or other malfunctions. Replace if there are any abnormal conditions. Refer to " «INSPECTION»(ref-675600-S27556050712014120500000) ".
- Rotate steering wheel to make sure it is centered and there is no binding, noise or excessive steering effort.
- Make sure that the number of turns are the same from the straight-ahead position to the left and right locks.
- Check each part of steering system for damage or other malfunctions. Replace if there are any abnormal conditions.
- Check the steering wheel play, neutral position steering wheel, steering wheel turning force, and front wheel turning angle. Refer to " «INSPECTION»(ref-675600-S39033142912014120500000) ".
- Check wheel alignment. Refer to " «ADJUSTMENT»(ref-675608-S28541819612014120500000) ".
- Check the neutral position of the steering angle sensor. Refer to " «WORK PROCEDURE»(ref-675599-S14805241842014120500000) ".
