Body, Lock & Security System: Application Nissan Frontier D40

URETHANE FOAM APPLICATIONS

Use commercially available spray foam for sealant (foam material) repair of material used on vehicle. Read instructions on product for fill procedures.

Scheme 105

Scheme 106

1. Fill procedures after installation of service part. Remove foam material remaining on vehicle side. Clean area in which foam was removed. Install service part. Insert nozzle into hole near fill area and fill foam material or fill in enough to close gap with the service part. see scheme 252: Identifying Foam Material And Nozzle Insert Hole
2. Fill procedures before installation of service part. Remove foam material remaining on vehicle side. Clean area in which foam was removed. Fill foam material on wheelhouse outer side. NOTE: Fill in enough to close gap with service part while avoiding flange area. Install service part. NOTE: Refer to label for information on working times. see scheme 253: Identifying Foam Material