Remote Control Entry Functions Nissan Frontier D40

Remote Control Entry Functions

Operation Description

1. When a button on the keyfob is operated, the signal is sent from the keyfob and received by the remote keyless entry receiver.
2. The received signal is sent to the BCM and compared with the registered ID number.
3. If the ID number matches, the BCM sends the lock/unlock signal to each door lock actuator.
4. When the door lock actuators receive this signal, each operates to lock/unlock its door.
5. BCM locks all doors with input of LOCK signal from keyfob.
6. When an UNLOCK signal is sent from keyfob once, driver's door will be unlocked.
7. Then, if an UNLOCK signal is sent from keyfob again within 5 seconds, all other doors will be unlocked. Remote control entry operation conditions REMOTE CONTROL ENTRY OPERATION CONDITIONS Keyfob operation Operation condition Door lock operation (locking) With key removed (key switch: OFF) Closing all doors (door switch: OFF) Door lock operation (unlocking) With key removed (key switch: OFF)