Transfer Case ATX14B: Maintenance Nissan Armada I рестайлинг

TRANSFER FLUID CHECK

Check for leaks and fluid level. Refer to " INSPECTION ".

TRANSFER FLUID TEMPERATURE SENSOR

The transfer fluid temperature sensor detects the transfer fluid temperature and sends a signal to the transfer control unit.

FLUID LEAKAGE AND FLUID LEVEL

1. Make sure that fluid is not leaking from the transfer assembly or around it.
2. Check fluid level from the filler plug hole as shown in graphic below. CAUTION: Do not start engine while checking fluid level .
3. Install the filler plug with a new gasket to the transfer. Tighten to the specified torque. Refer to " «DISASSEMBLY AND ASSEMBLY»(ref-382185-S11347808432011011400000) ". CAUTION: Do not reuse gasket.

Scheme 238

1. Set transfer state as 2WD when 4WD shift switch is at 2WD, or as AUTO when 4WD shift switch is at AUTO. CAUTION: When removing transfer control unit, transfer state must be at 2WD or AUTO.
2. Turn the ignition switch OFF and disconnect negative battery terminal.
3. Remove the lower instrument panel RH an glove box. Refer to " «EXPLODED VIEW»(ref-382164-S24605186092011011400000) ".
4. Disconnect the two transfer control unit connectors.
5. Remove the transfer control unit bolts.
6. Remove the transfer control unit.