REMOVAL
Note. The driver seat control unit is part of the driver seat.
- Remove the driver seat. Refer to " «REMOVAL AND INSTALLATION»(ref-382174-S15588275752011011400000) ".
- Disconnect driver seat control unit electrical connector.
- Remove driver seat control unit from driver seat.
INSTALLATION
Installation is in the reverse order of removal.
| CAUTION | When removing and installing, use shop cloths to protect parts from damage. |
Scheme 176
- Disconnect the battery negative terminal.
- Remove the instrument driver lower panel. Refer to " «REMOVAL AND INSTALLATION»(ref-382164-S01662027112011011400000) ".
- Remove the screw from the automatic drive positioner control unit (1).
- Remove automatic drive positioner control unit (1) from bracket and disconnect electrical connectors.
Installation is in the reverse order of removal.
| CAUTION | Clamp the harness in position. |
Note. After installing the automatic drive positioner control unit, perform additional service when disconnecting battery negative terminal. Refer to " SPECIAL REPAIR REQUIREMENT ".
Removal and Installation
Refer to " REMOVAL AND INSTALLATION " for removal and installation of seat memory switch.
The door mirror remote control switch is part of the power window switch assembly. Refer to " REMOVAL AND INSTALLATION " for removal and installation of door mirror remote control switch.
Refer to " REMOVAL AND INSTALLATION " for accelerator pedal and " REMOVAL AND INSTALLATION " for brake pedal when removing pedal adjusting motors.