Power Window Control System (Except Hybrid): Application

Power Window Control System (Except Hybrid): Application Nissan Altima L32

APPLICATION ITEM

CONSULT-III performs the following functions via CAN communication with BCM.

Diagnosis mode	Function Description
WORK SUPPORT	Changes the setting for each system function.
SELF-DIAG RESULTS	Displays the diagnosis results judged by BCM. Refer to " DTC INDEX ".
CAN DIAG SUPPORT MNTR	Monitors the reception status of CAN communication viewed from BCM.
DATA MONITOR	The BCM input/output signals are displayed.
ACTIVE TEST	The signals used to activate each device are forcibly supplied from BCM.
ECU IDENTIFICATION	The BCM part number is displayed.
CONFIGURATION	This function is not used even though it is displayed.

CONSULT-III FUNCTIONS CHART

BCM can perform the following functions for each system.

Note. It can perform the diagnosis modes except the following for all sub system selection items.

DIAGNOSIS MODES DESCRIPTION CHART

CONSULT-III performs the following functions via CAN communication with BCM.

Diagnosis mode	Function Description
WORK SUPPORT	Changes the setting for each system function.
SELF-DIAG RESULTS	Displays the diagnosis results judged by BCM. Refer to " DTC INDEX ".
CAN DIAG SUPPORT MNTR	Monitors the reception status of CAN communication viewed from BCM.
DATA MONITOR	The BCM input/output signals are displayed.
ACTIVE TEST	The signals used to activate each device are forcibly supplied from BCM.
ECU IDENTIFICATION	The BCM part number is displayed.
CONFIGURATION	This function is not used even though it is displayed.

DIAGNOSIS MODE FUNCTION CHART

BCM can perform the following functions for each system.

Note. It can perform the diagnosis modes except the following for all sub system selection items.

DIAGNOSIS MODE FUNCTION CHART