Home ReviewsRefund
Home/Nissan/Altima/Nissan Altima L31 facelift (2004-2006)/Repair manual/Driver Information System/FUNCTION
Contents Wiring diagrams Section: Driver Information System All sections

FUNCTION Nissan Altima L31 facelift

Driver Information System ~122 words

FUNCTION

ItemDescription
Ignition key warning chimeSounds warning chime when driver's door is opened with key in ignition key cylinder and ignition switch "OFF" or "ACC" position.
Light warning chimeSounds warning chime when driver's door is opened with lighting switch in the 1st or 2nd position and the key removed from the ignition switch.
Seat belt warning chimeSounds warning chime for approximately 6 seconds after ignition switch is turned "ON" when driver seat belt is unfastened.

ITEM DESCRIPTION

Note. When ignition key warning chime, light warning chime, and seat belt warning chime should be performed at the same time, the priorities for each chime are the following.

  1. Seat belt warning chime
  2. Ignition key warning chime
  3. Light warning chime Power is supplied at all times
  1. Through 50A fusible link (letter f, located in the fuse and fusible link box)
  2. To BCM terminal 70, and
  3. Through 10A fuse [No. 21, located in the fuse block (J/B)]
  4. To key switch and key lock solenoid terminal 3. Ground is supplied
  5. To BCM terminal 67
  6. Through body grounds M57, M61, and F14.

When the proper signal, or combination of signals, is received by the combination meter, the warning chime will sound.