Home/Nissan/350Z/Nissan 350Z I (2002-2005)/Repair manual/Automatic Trans/Automatic Transmission: Specifications
Contents Wiring diagrams Section: Automatic Trans All sections

Automatic Transmission: Specifications Nissan 350Z I

Automatic Trans 5 illustrations

Torque Converter Clutch Solenoid

  1. The solenoid is switched "OFF" to release the lock-up.

GENERAL SPECIFICATIONS

Applied modelVQ35DE engine
Automatic transmission modelRE5R05A
Transmission model code number90X72
Stall torque ratio2.0:1
Transmission gear ratio1st3.540
2nd2.264
3rd1.417
4th1.000
5th0.834
Reverse2.370
Recommended fluidNissan Matic Fluid J*1
Fluid capacity10.3 liter (10-7/8 US qt, 9-1/8 lmp qt)

General Specifications Table

CAUTIONUse only Genuine Nissan ATF Matic Fluid J. Do not mix with other fluid. Using automatic transmission fluid other than Genuine Nissan ATF Matic Fluid J will deteriorate in driveability and automatic transmission durability, and may damage the automatic transmission, which is not covered by the NISSAN new vehicle limited warranty.

*1: Refer to A/T FLUID.

Scheme 1

Scheme 1: VEHICLE SPEED WHEN SHIFTING GEARS
  1. At half throttle, the accelerator opening is 4/8 of the full opening.

Scheme 2

Scheme 2: VEHICLE SPEED WHEN PERFORMING AND RELEASING COMPLETE LOCK-UP
  1. At closed throttle, the accelerator opening is less than 1/8 condition.
  2. At half throttle, the accelerator opening is 4/8 of the full opening.

Scheme 3

Scheme 3: VEHICLE SPEED WHEN PERFORMING AND RELEASING SLIP LOCK-UP
  1. At closed throttle, the accelerator opening is less than 1/8 condition.

Scheme 4

Scheme 4: STALL SPEED

Scheme 5

Scheme 5: LINE PRESSURE

See also:
WARNING LAMPS