GENERAL INFORMATION
For the steering lock-related information for vehicles with KOS, refer to KEYLESS OPERATION SYSTEM (KOS) .
TECHNICAL DESCRIPTION (COMMENT)
If this function does not work normally, these input signal circuit(s), the ignition key hole illumination lamp or the ETACS-ECU may be defective.
When the power supply system of ignition switch has a problem, none of the equipment and system connected to the ignition switch works even if the ignition switch is operated.
The mechanical steering lock controls the steering lock solenoid, so that the steering lock hole turns from ACC to LOCK only when the selector lever is in the P position. If the steering lock hole does not turn from ACC to LOCK even when the selector lever is in the P position, or if the steering lock hole turns from ACC to LOCK when the selector lever is in other than the P position, the steering lock solenoid, selector lever assembly, wiring harness, or connector may have a problem.