Home ReviewsRefund
Home/Mitsubishi/Outlander/Mitsubishi Outlander III (2012-2015)/Repair manual/Combination Meter/PROBABLE CAUSES
Contents Wiring diagrams Section: Combination Meter All sections

PROBABLE CAUSES Mitsubishi Outlander III

Combination Meter ~494 words

PROBABLE CAUSES

  1. The CAN bus line may be defective.
  2. The combination meter may be defective.
  3. The engine control module may be defective.

With the ignition switch in the ON position, system voltage between 10 - 16 volts (data from ETACS-ECU), power supply fuse (IOD fuse) is OK, or odometer value is 80.5 km (50 miles) or more, and the communication with ETACS-ECU cannot be established for 2, 500 ms or more, the combination meter determines that a problem has occurred.

With the ignition switch in the ON position, system voltage between 10-16 volts (data from ETACS-ECU), power supply fuse (IOD fuse) is OK, or odometer value is 80.5 km (50 miles) or more, and the communication with SRS-ECU cannot be established for 2, 500 ms or more, the combination meter determines that a problem has occurred.

With the ignition switch in the ON position, system voltage between 10 - 16 volts (data from ETACS-ECU), power supply fuse (IOD fuse) is OK, or odometer value is 80.5 km (50 miles) or more, and the communications with occupant classification-ECU cannot be established for 2, 500 ms or more, the combination meter determines that a problem has occurred.

With the ignition switch in the ON position, system voltage between 10-16 volts (data from ETACS-ECU), power supply fuse (IOD fuse) is OK, or odometer value is 80.5 km (50 miles) or more, and the communication with A/C-ECU cannot be established for 2, 500 ms or more, the combination meter determines that a problem has occurred.

With the ignition switch in the ON position, system voltage between 10 - 16 V (data from ETACS-ECU), power supply fuse (IOD fuse) is OK, or odometer value is 80.5 km (50 miles) or more, and the communication with KOS-ECU or WCM cannot be established for 2, 500 ms or more, the combination meter determines that a problem has occurred.

With the ignition switch in the ON position, system voltage between 10 - 16 volts (data from ETACS-ECU), power supply fuse (IOD fuse) is OK, or odometer value is 80.5 km (50 miles) or more, and the communications with radio and CD player cannot be established for 2, 500 ms or more, the combination meter determines that a problem has occurred.

With the ignition switch in the ON position, system voltage between 10 - 16 volts (data from ETACS-ECU), power supply fuse (IOD fuse) is OK, or odometer value is 80.5 km (50 miles) or more, and the communications with CAN box unit (multivision display) cannot be established for 2, 500 ms or more, the combination meter determines that a problem has occurred.

With the ignition switch in the ON position, system voltage between 10 - 16 V (data from ETACS-ECU), power supply fuse (IOD fuse) is OK, or odometer value is 80.5 km (50 miles) or more, and the communication with OSS-ECU cannot be established for 2, 500 ms or more, the combination meter determines that a problem has occurred.