Contents Wiring diagrams Section: Procedures All sections

Maintenance Information: Specifications Mitsubishi Montero II

Procedures ~110 words

WHEEL & TIRE SPECIFICATIONS

Tire specifications are imprinted on the tire side wall. The recommended cold tire inflation pressures are listed on a label attached to the rear face of the driver's door. These pressures provide the best combination of ride comfort, tire wear and stability under normal conditions.

CAUTIONDO NOT mix tires of different design such as radial ply with bias or bias-belted tires. Mixing tire types will adversely affect road handling and may lead to loss of vehicle control. When using snow tires, they must be used in set of four for maneuverability and safety. DO NOT use tire chains on front wheels.

WHEEL TIGHTENING

ApplicationFt. Lbs. (N.m.)
198350-57 (70-80)
1984-9672-87 (100-120)

WHEEL TIGHTENING SPECIFICATIONS

BATTERY SPECIFICATIONS

CAUTIONWhen battery is disconnected, vehicles equipped with computers may lose memory data. When battery power is restored, driveability problems may exist on some vehicles. These vehicles may require a relearn procedure. See COMPUTER RELEARN PROCEDURES article in the GENERAL INFORMATION Section.

Battery is maintenance-free and does not normally require additional water. However, under severe conditions it is advisable to check battery fluid periodically. Use only distilled water to fill battery cell should it become necessary to add water. Charge condition can be checked by a visual test indicator on top of battery.