Dome Light - Lancer Evolution: Overview Mitsubishi Lancer X рестайлинг

Scheme 18

1. A front dome light, installed to the front part of the roof, has been equipped with the lens-push type front dome light/reading light which can be operated easily from the driver's and front passenger's seat, offering excellent operability for turning on and off the light.
2. The rear dome light, which illuminates the rear passenger's seat, is installed above the rear seat.
3. The luggage compartment light is installed to the upper part of the luggage compartment.

TECHNICAL DESCRIPTION (COMMENT)

If this does not work normally, the above switch input circuit(s), front dome light, or ETACS-ECU may have a problem.

If this does not work normally, the above switch input circuit(s), rear dome light, or ETACS-ECU may have a problem.

If this does not work normally, the trunk lid latch switch input circuit, luggage compartment light, or ETACS-ECU may have a problem.

The ETACS-ECU operates the interior light auto-cut function in accordance with the input signals below.

1. Ignition switch (ACC)
2. Ignition switch (IG1)
3. Door switches

If this function does not work normally, these input signal circuit(s) or the ETACS-ECU may have a problem. Also, "Interior light auto cut timer" may be set to "Disable" through customization.