Contents Section: Differentials & Drive Axles All sections

Electronic Control Awd - Lancer: Specifications Mitsubishi Lancer X рестайлинг

SERVICE SPECIFICATIONS

ItemStandard value
Electronic control coupling solenoid resistance ohms [at 20 °C (68°F)]Electronic control AWD2.2 - 4.0
Electronic control coupling stud bolt length mm (in)22.3 - 25.1 (0.88 - 0.99)

SERVICE SPECIFICATIONS

FREEZE FRAME DATA SPECIFICATIONS

Item No.ItemUnit/Content
01OdometerXxxx mile
02Ignition cycle
03Coupling torqueXxxx N.m
04Current trouble accumulative timeXxxx min
06Coupling temperatureXxxx °F
07CAN communication (ABS/ASC) error flagOFF (Normal)/ON (Malfunction)
08CAN communication (engine) error flagOFF (Normal)/ON (Malfunction)
09CAN communication (ETACS) error flagOFF (Normal)/ON (Malfunction)
15AWD mode2WD
4WD
4WD LOCK
16FL wheel speed sensorXxxx mph
17FR wheel speed sensorXxxx mph
18RL wheel speed sensorXxxx mph
19RR wheel speed sensorXxxx mph
NOTE: xxxx indicates the value.
NOTE
Xxxx indicates the value.

FREEZE FRAME DATA SPECIFICATIONS