CAN BUS DIAGNOSTICS TABLE Mitsubishi Lancer X

CAN BUS DIAGNOSTICS TABLE

This diagnosis applies only to the CAN bus lines. If a different system is defective, proceed to the applicable diagnosis article for each system. Observe the diagnosis procedure below only when the CAN bus line is defective.

CAN BUS DIAGNOSTICS REFERENCE Scan tool screen (The ECUs that are not adopted are not displayed.) Comment Diagnosis detail Reference page Short circuit to battery in red displayed area is estimated. Diagnosis Item 1: Diagnose when the scan tool cannot receive the data sent by ETACS-ECU. DIAGNOSTIC ITEM 1: DIAGNOSE WHEN THE SCAN TOOL CANNOT RECEIVE THE DATA SENT BY ETACS-ECU. Grounding in red displayed area is estimated. Diagnosis Item 2 Malfunction of the ETACS-ECU. DIAGNOSTIC ITEM 2: MALFUNCTION OF THE ETACS-ECU. CAN-C: A bus-off failure is present in the gateway ECU. Diagnosis Item 3 Abnormal short between the CAN-C bus lines. DIAGNOSTIC ITEM 3: ABNORMAL SHORT BETWEEN THE CAN-C BUS LINES. CAN-C: Grounding in red displayed area is estimated Diagnosis Item 4 Diagnose shorts in the ground to CAN-C bus line. DIAGNOSTIC ITEM 4: DIAGNOSE SHORTS IN THE GROUND TO CAN-C BUS LINE. CAN-C: Short circuit to battery in red displayed area is estimated Diagnosis Item 5 Diagnose shorts in the power supply to CAN-C bus line. DIAGNOSTIC ITEM 5: DIAGNOSE SHORTS IN THE POWER SUPPLY TO CAN-C BUS LINE. CAN-C: Disconnection in red displayed area is estimated. Diagnosis Item 6 Diagnose when the scan tool cannot receive the data sent by S-AWC-ECU. DIAGNOSTIC ITEM 6: DIAGNOSE WHEN THE SCAN TOOL CANNOT RECEIVE THE DATA SENT BY S-AWC-ECU. CAN-C: Disconnection in red displayed area is estimated. Diagnosis Item 7 Diagnose when the scan tool cannot receive the data sent by steering wheel sensor. DIAGNOSTIC ITEM 7: DIAGNOSE WHEN THE SCAN TOOL CANNOT RECEIVE THE DATA SENT BY STEERING WHEEL SENSOR. CAN-C: Disconnection in red displayed area is estimated. Diagnosis Item 8 Diagnose when the scan tool cannot receive the data sent by shift lever. < TC-SST > DIAGNOSTIC ITEM 8: DIAGNOSE WHEN THE SCAN TOOL CANNOT RECEIVE THE DATA SENT BY SHIFT LEVER. < TC-SST > CAN-C: Disconnection in red displayed area is estimated. Diagnosis Item 9 Diagnose when the scan tool cannot receive the data sent by ASC-ECU. DIAGNOSTIC ITEM 9: DIAGNOSE WHEN THE SCAN TOOL CANNOT RECEIVE THE DATA SENT BY ASC-ECU. CAN-C: Disconnection in red displayed area is estimated. Diagnosis Item 10 Diagnose when the scan tool cannot receive the data sent by ECM. DIAGNOSTIC ITEM 10: DIAGNOSE WHEN THE SCAN TOOL CANNOT RECEIVE THE DATA SENT BY ECM. CAN-C: Disconnection in red displayed area is estimated. Diagnosis Item 11 Diagnose when the scan tool cannot receive the data sent by TC-SST-ECU. < TC-SST > DIAGNOSTIC ITEM 11: DIAGNOSE WHEN THE SCAN TOOL CANNOT RECEIVE THE DATA SENT BY TC-SST-ECU. < TC-SST > CAN-C: Disconnection in red displayed area is estimated. Diagnosis Item 12 Diagnose the lines between the ETACS-ECU and joint connector (CAN2). DIAGNOSTIC ITEM 12: DIAGNOSE THE LINES BETWEEN THE ETACS-ECU AND JOINT CONNECTOR (CAN2). CAN-C: Disconnection in red displayed area is estimated. Diagnosis Item 13 Diagnose the lines between joint connector (CAN2) and joint connector (CAN3). DIAGNOSTIC ITEM 13: DIAGNOSE THE LINES BETWEEN JOINT CONNECTOR (CAN2) AND JOINT CONNECTOR (CAN3). CAN-C: Disconnection in red displayed area is estimated. Diagnosis Item 14 Diagnose the lines between joint connector (CAN3) and joint connector (CAN 4). < TC-SST > DIAGNOSTIC ITEM 14: DIAGNOSE THE LINES BETWEEN JOINT CONNECTOR (CAN3) AND JOINT CONNECTOR (CAN4). < TC-SST > CAN-B: Disconnection in red displayed area is estimated. Diagnosis Item 15 Diagnose when the scan tool cannot receive the data sent by KOS-ECU. DIAGNOSTIC ITEM 15: DIAGNOSE WHEN THE SCAN TOOL CANNOT RECEIVE THE DATA SENT BY KOS-ECU. Diagnosis Item 16 Diagnose when the scan tool cannot receive the data sent by WCM. DIAGNOSTIC ITEM 16: DIAGNOSE WHEN THE SCAN TOOL CANNOT RECEIVE THE DATA SENT BY WCM. CAN-B: Disconnection in red displayed area is estimated. Diagnosis Item 17 Diagnose when the scan tool cannot receive the data sent by SRS-ECU. DIAGNOSTIC ITEM 17: DIAGNOSE WHEN THE SCAN TOOL CANNOT RECEIVE THE DATA SENT BY SRS-ECU. CAN-B: Disconnection in red displayed area is estimated. Diagnosis Item 18 Diagnose when the scan tool cannot receive the data sent by occupant classification-ECU. DIAGNOSTIC ITEM 18: DIAGNOSE WHEN THE SCAN TOOL CANNOT RECEIVE THE DATA SENT BY OCCUPANT CLASSIFICATION-ECU. CAN-B: Disconnection in red displayed area is estimated. Diagnosis Item 19 Diagnose when the scan tool cannot receive the data sent by A/C-ECU. DIAGNOSTIC ITEM 19: DIAGNOSE WHEN THE SCAN TOOL CANNOT RECEIVE THE DATA SENT BY A/C-ECU. CAN-B: Disconnection in red displayed area is estimated. Diagnosis Item 20 Diagnose when the scan tool cannot receive the data sent by radio and CD player or CD changer. DIAGNOSTIC ITEM 20: DIAGNOSE WHEN THE SCAN TOOL CANNOT RECEIVE THE DATA SENT BY RADIO AND CD PLAYER OR CD CHANGER. CAN-B: Disconnection in red displayed area is estimated. Diagnosis Item 21 Diagnose when the scan tool cannot receive the data sent by CAN box unit. DIAGNOSTIC ITEM 21: DIAGNOSE WHEN THE SCAN TOOL CANNOT RECEIVE THE DATA SENT BY CAN BOX UNIT. CAN-B: Disconnection in red displayed area is estimated. Diagnosis Item 22 Diagnose when the scan tool cannot receive the data sent by satellite radio tuner. DIAGNOSTIC ITEM 22: DIAGNOSE WHEN THE SCAN TOOL CANNOT RECEIVE THE DATA SENT BY SATELLITE RADIO TUNER. CAN-B: Disconnection in red displayed area is estimated. Diagnosis Item 23 Diagnose when the scan tool cannot receive the data sent by hands-free module. DIAGNOSTIC ITEM 23: DIAGNOSE WHEN THE SCAN TOOL CANNOT RECEIVE THE DATA SENT BY HANDS FREE MODULE. CAN-B: Disconnection in red displayed area is estimated. Diagnosis Item 24 Diagnose when the scan tool cannot receive the data sent by combination meter. DIAGNOSTIC ITEM 24: DIAGNOSE WHEN THE SCAN TOOL CANNOT RECEIVE THE DATA SENT BY COMBINATION METER. CAN-B: A failure in the red section, or a bus-off failure is present in the gateway ECU. Diagnosis Item 25 Short to power supply or ground in both CAN_H and CAN_L lines of the CAN-B bus lines. DIAGNOSTIC ITEM 25: SHORT TO POWER SUPPLY OR GROUND IN BOTH CAN_H AND CAN_L LINES OF THE CAN-B BUS LINES. CAN-B: Disconnection in red displayed area is estimated. Diagnosis Item 26 Diagnose the ETACS-ECU, joint connector (CAN1) or lines between ETACS-ECU and joint connector (CAN1). DIAGNOSTIC ITEM 26: DIAGNOSE THE ETACS-ECU, JOINT CONNECTOR (CAN1) OR LINES BETWEEN ETACS-ECU AND JOINT CONNECTOR (CAN1). CAN-B: Disconnection in red displayed area is estimated. Diagnosis Item 27 Short to power supply or ground, open circuit or line-to-line short in the CAN-B bus lines. DIAGNOSTIC ITEM 27: SHORT TO POWER SUPPLY OR GROUND, OPEN CIRCUIT OR LINE-TO-LINE SHORT IN THE CAN-B BUS LINES.

Scheme 102

Scheme 103

Scheme 104

Scheme 105

Scheme 106

Scheme 107

Scheme 108

Scheme 109

Scheme 110

Scheme 111

Scheme 112

Scheme 113

Scheme 114

Scheme 115

Scheme 116

Scheme 117

Scheme 118

Scheme 119

Scheme 120

Scheme 121

Scheme 122

Scheme 123

Scheme 124

Scheme 125

Scheme 126

CAN-RELATED CONNECTOR REFERENCE